NIOC BITUMEN SPECIFICATIONS  

1. specs :a) grade 60/70

specific gravity at 25/25 deg c*             spec: 1.00/1.06      test ASTM D.70

pnetration at 25 deg c*                               "   60/70                   "         D.5

softening point deg c*                                 "   49/566                 "         D.36

ductility at 25 deg c*  CMS                         "   100 min.               "         D.113

loss of heating PCT WT                             "    0.2 max               "          D.6

drop in penetration after heating PCT        "   20 max                 "          D.5

flash point deg c*                                       "   250 min                 "          D.92

solubility in CS2 PCT WT                          "   99.5 min                "          D.4

organic matter insoluble in CS2 PCT WT "   0.2 max                  "          D.4

spot test                                                    " negative       " *A.A.S.H.O T102-42

*AMERICAN ASSOCIATION OF STATE HIGHWAY OFFICIALS

b) grade 85/100

specific gravity at 25/25 deg c*                   spec 1.01/1.05       test      D.70

penetration at 25 deg c*                                 "    85/100             "         D.5

softening point deg c*                                     "    45/52               "         D.36

ductility at 25 deg c* CMS                              "    100 min            "        D.113

loss on heating PCT WT                                "     0.5 max           "        D.6

drop in penetration after heating PCT            "     20 max            "        D.5

flash point deg c*                                            "    225 min            "        D.92

solubility in CS2 PCT WT                               "    99.5 min           "        D.4

organic matter insoluble in CS2 PCT WT      "     0.2 max            "        D.4

spot test                                     Spec: negative     Test:  *A.A.S.H.O T 102-42

*AMERICAN ASSOCIATION OF STATE HIGHWAY OFFICIALS  

2.Packing: packed in corrugated newly produced cold rolled steel drums coated in antirust

black with description as follows:

hight 900 mm

diameter 500 mm

thickness 0.6 and/or 0.7 mm

gross weight 180 kgs

net weight 170 kgs

tolerance max +/-5%  

**********************************************

motor oil sf/cc SAE 40

	Specification	Test method
Density at15dcKg/m3	to be reported	ASTMDD1298
Colour		D1500
Flash point	dc 225min	D 92
Pour point	dc 9 max	D97
ViscosityKin@100dcmm2/sec	13.5-16.5	D445
Viscosity Kin@ 40dcmm2/sec	tobereported	D445
Viscisity index	90 min	D227o
Viscosity Apparent MPA.s		D5293
Foaming characteristics:	Tendency	Stability In
	seq.1@24 dc	ml 25/0 max
	seq.2@93.5 dc	ml 150/0 max
	seq.3@24 dc	ml 25/0 max
Water and Sediment %vol	0.02 max	D2273
total BasenumberT.B.Nmgkoh/g	7.0min	D2896

Packing :: Drums 220 lit

Payment: : By irrevocable & confirmed L/C at sight

Delivery time : 35 days after L/C

 

***********************

FOOTS OIL 55% WAX CONT PACKED IN 175KG USED DRUM

BASE OIL SN 500 PACKD IN 208 LIT USED DRUM 

MOTOR OILSB/CC / GEAR OIL IN  220 LIT DRUM  

GREASES

BRAK FLUID DOT 3 & DOT 4

  ANTIFREEZE &  COOLANTS  

INDUSTRIAL LUBRICANTS

MINERAL BASE OILS

RUBBER PROCESS OILS

 

********************************************************

For other relative products , please visit :

Inorganics	Organics	Food Additives	Pharmaceticals	Chemical Agents	Fertilizers	Dyestuff
Pesticides	Paraffins	Lubricants	Petroleum Jelly	Chemical Products	HOME	Bitumen

HOME